Calibration weights
Force gauges
Calibration Weights
Electroninc Balances
Electrical Balance
Load Cells
Load Cells
Push Pull Gauges
Load Cells
Electrical Single Pan balances
( A20S & R10S )
Electrical Single Pan balances
( A200S & R100S )

Test Weights
Triple Beam Balances
Electrical balances :

Electrical Single Pan balances

Introduction :

offers Electrical single pan analytical and research balances to meet the demands of highly precise and accurate weighting for all analytical and research oriented works and requirements.They are Compression Load Cells, Tension Load Cells, Cast Iron Weights, OIML weights...

Principle of working:

1. The principle of the single pan balance is of the constant load balance. One end of the beam has constant load and the other end consists of the pan and the standard ring weights. When the sample to be weighed is kept on the pan, the equilibrium is unstable and to restore back the equilibrium, corresponding ring weights must be shifted to get the original balance. This is fine tuned on the micro scale which gives the precise weight. The principle of single beam eliminates the lever error and the constant load eliminates sensitivity error.

Few of the salient features of our balance are :
    Weighing Principle : Substitution of Weights
    Daming : Air
    Knives & Bearing : Agate
    Pan : Stainless Steel ( Dia.95mm, Ht.160mm)
    Weighing Chamber : 160mm (L) × 200mm (B) × 180 mm (H)
    Bulb : 6.2V, 4.5 Watts Screw type
    Nett Weight : 9.5 kg
    Power Supply : 230 V AC, 50 Hz
    Battery Operation : 9V DC (dry cell )
    Models A 200S R100S A20S R10S
    Capacity(g) 200 100 20 10
    Readability (mg) 0.1 0.01 0.1 0.01
    Optical Range (mg) 1000 100 1000 100
    Accuracy (mg) 0.1 0.01 0.1 0.01
    Built in weights (g) 199 99.9 19 9.9

Triple Beam Balances:

Sensortron manufactures Triple beam balances. These are basically rough balances, where precision is really not a concern. The balance has three beams with independent riders on it. One end of the balance has the pan and the other end has the counter proportional weight with regard to the capacity of the balance.

The triple beam comes with a minimum capacity of 111 g to a maximum of 10 kg. The Single Pan Electrical balances and the triple beam balances does not require verification from weights and measures department.



Home Contact us